A metal splashback for an AGA or range cooker must combine heat resistance, durability, and precise fabrication. At Metal Sheets Ltd, we manufacture bespoke splashbacks in brass, zinc, copper, and stainless steel, tailored to suit wide cooker runs, alcove installations, and full feature walls, including bespoke AGA splashbacks.
With over 15 years’ experience, we produce made-to-measure splashbacks with accurate cut-outs, clean edge detailing, and seamless panels up to 3 metres in length — ideal for AGA and range cooker installations where standard splashbacks fall short.
While stainless steel offers a clean and highly practical solution, many clients choose aged brass, copper, or zinc splashbacks for their warmer tones and characterful finishes, particularly in traditional or design-led kitchens.
For technical guidance, pricing, or project discussion, please contact us or complete the enquiry form below.
AGA and range cookers generate sustained heat and are often installed within wider cooker runs or alcove settings. Metal splashbacks are particularly well suited to these environments due to their durability, heat tolerance, and ease of maintenance.
Unlike tiled or glass alternatives, a metal splashback can be fabricated as a single, joint-free panel, within the sheet size, reducing cleaning lines and improving long-term performance. This is especially beneficial behind larger cookers where multiple heat zones and splashes are concentrated.
AGA and range cookers generate sustained heat and are often installed within wider cooker runs or alcove settings. Metal splashbacks are particularly well suited to these environments due to their durability, heat tolerance, and ease of maintenance.
Unlike tiled or glass alternatives, a metal splashback can be fabricated as a single, joint-free panel, within the sheet size, reducing cleaning lines and improving long-term performance. This is especially beneficial behind larger cookers where multiple heat zones and splashes are concentrated.
In this image: A bespoke metal splashback installed behind a range cooker, showing a seamless panel with accurate cut-outs and clean edge detailing.
We manufacture splashbacks to suit the larger proportions of AGA and range cookers, with sheet sizes available up to:
3 metres × 1.25 metres
This allows most installations to be completed with a single continuous panel, avoiding visible joints and ensuring a clean, uninterrupted finish across the full cooker width.
Each splashback is produced to your exact measurements and can include:
We manufacture splashbacks to suit the larger proportions of AGA and range cookers, with sheet sizes available up to:
3 metres × 1.25 metres
This allows most installations to be completed with a single continuous panel, avoiding visible joints and ensuring a clean, uninterrupted finish across the full cooker width.
Each splashback is produced to your exact measurements and can include:
In this image: A bespoke splashback panel with precision-cut socket openings and clean edge detailing, designed for accurate installation.
We manufacture bespoke metal splashbacks in a range of materials to suit both traditional and contemporary kitchen designs:
Stainless steel splashbacks are often selected for t
We manufacture bespoke metal splashbacks in a range of materials to suit both traditional and contemporary kitchen designs:
Stainless steel splashbacks are often selected for their practicality and ease of cleaning, while aged brass, copper, and zinc finishes provide a more decorative, character-driven option for traditional and design-led interiors.
In this image: An aged zinc splashback installed within a cooker alcove, showing a soft patina finish suited to traditional AGA kitchens.
The choice of finish plays a key role in how a splashback integrates with an AGA or range cooker setting. Many kitchens favour softer, less reflective finishes that complement cabinetry, worktops, and surrounding materials.
Aged and antique finishes are particularly popul
The choice of finish plays a key role in how a splashback integrates with an AGA or range cooker setting. Many kitchens favour softer, less reflective finishes that complement cabinetry, worktops, and surrounding materials.
Aged and antique finishes are particularly popular for AGA splashbacks, where they provide a softer visual balance against larger cooker units and traditional cabinetry.
In this image: Close-up of an aged copper splashback showing natural patina variation, depth of tone, and surface movement.
All splashbacks are fabricated using precision cutting and forming equipment in our Liverpool workshop to ensure accurate fit and consistent detailing.
This allows us to produce splashbacks that fit precisely around AGA and range cooker installations, reducing installation time and ensuring a high-quality finish.
In this image: Surface detail of an aged zinc splashback, highlighting natural texture and tonal variation across the patina.
Whether you require an AGA splashback, range cooker splashback or full-width feature wall every splashback we produce is made to order, tailored to your kitchen layout, appliance size, and finish preference. Whether you require a single panel behind a cooker or a full-width feature wall, we can help you achieve a clean, durable, and visually striking result.
We’ve been fabricating bespoke metal interiors for over 15 years from our Liverpool workshop.
Contact us today for a quote or to discuss your AGA or range cooker splashback project.
In this image:
Whether you require an AGA splashback, range cooker splashback or full-width feature wall every splashback we produce is made to order, tailored to your kitchen layout, appliance size, and finish preference. Whether you require a single panel behind a cooker or a full-width feature wall, we can help you achieve a clean, durable, and visually striking result.
We’ve been fabricating bespoke metal interiors for over 15 years from our Liverpool workshop.
Contact us today for a quote or to discuss your AGA or range cooker splashback project.
In this image: A bespoke aged brass splashback installed behind a range cooker, complementing cabinetry and creating a warm, characterful kitchen finish.
Metal splashbacks are one of the most practical and durable options for AGA and range cookers. Materials such as brass, zinc, and copper offer a more decorative finish, while stainless steel provides a clean, highly heat-resistant solution for modern kitchens.
For most AGA kitchens, aged or antique metal splashbacks are preferred for their softer appearance and ability to complement traditional cabinetry.
Yes. All of our splashbacks are
Metal splashbacks are one of the most practical and durable options for AGA and range cookers. Materials such as brass, zinc, and copper offer a more decorative finish, while stainless steel provides a clean, highly heat-resistant solution for modern kitchens.
For most AGA kitchens, aged or antique metal splashbacks are preferred for their softer appearance and ability to complement traditional cabinetry.
Yes. All of our splashbacks are made to measure and can include precision cut-outs for sockets, switches, extractor units, and cooker hoods. This ensures a clean, accurate fit with minimal installation work.
Yes — stainless steel splashbacks are highly heat-resistant, easy to clean, and well suited to cooker zones. They are often used in contemporary or commercial-style kitchens where a practical, low-maintenance surface is required.
Natural, aged, and antique metal finishes are considered “living surfaces” and may develop further character over time. Light cleaning with a soft cloth is usually sufficient, and occasional waxing can be used to moderate patina development if required.
We manufacture splashbacks in sizes up to 3 metres in length, allowing for full-width, joint-free panels behind most AGA and range cooker installations.
Yes. We manufacture bespoke splashbacks to suit standard and oversized range cookers, including 90cm, 100cm and 110cm models. Splashbacks can be supplied as a single panel, full-height feature wall, or with cut-outs for sockets and extractor units.
In this image: A stainless steel splashback installed behind a cooker hob, offering a clean, durable and highly heat-resistant surface suited to modern kitchen environments.
If you have a project requirement and would like to make some initial enquiries, please get in touch. Please contact us via email sales@metalsheets.co.uk, give us a call on 0151 526 4777, or fill the contact form. We’re looking forward to hearing from you.
Alternatively, shop safely and securely and purchase sheet metals via this website.
