We manufacture bespoke copper splashbacks in a range of finishes to suit different interiors and performance requirements. The example shown below illustrates an aged copper kitchen splashback with natural patina variation, bespoke socket cut-outs and a seamless full-width installation.

• Natural copper splashbacks – bright, warm metallic finish
• Aged copper splashbacks – darker tones with a softened appearance
• Antique copper splashbacks – rich, traditional patina
• Blue patina copper splashbacks – oxidised finish for feature walls
• Satin copper splashbacks – subtle brushed surface

Aged copper splashbacks like the example shown are often specified for kitchens and commercial interiors where a softer, less reflective finish is required.

Copper is a proven material for kitchen splashbacks, offering an excellent combination of
durability, hygiene, and long-term performance. As a non-ferrous metal, copper performs well in environments exposed to heat, moisture, and regular cleaning, making it particularly suitable for both residential and commercial kitchen installations.

From a fabrication perspective, copper allows for precise cutting, clean edge detailing, and accurate cut-outs for sockets, switches, and fixtures. This makes it especially well suited to bespoke copper kitchen splashbacks where exact sizing, tight tolerances, and seamless alignment are required.

Copper also offers natural antimicrobial properties, making it a hygienic surface around food preparation and cooking areas. Copper splashbacks can be supplied with optional surface sealing to stabilise the appearance and simplify ongoing maintenance where required.

Different copper finishes can be specified at the point of manufacture, depending on reflectivity, surface texture, and maintenance expectations. For clients seeking a made-to-measure copper kitchen splashback manufactured to specification, copper remains a versatile and dependable choice.

This page focuses on bespoke copper kitchen splashbacks fabricated to order.

For flat copper sheet cut to size for DIY or trade projects, visit our sister company Metal Offcuts.

Metal Sheets Ltd work closely with clients to design and fabricate bespoke copper kitchen splashbacks using high-quality copper sheets, manufactured to precise specifications. Whether you require a simple panel behind a cooker or a full-length splashback running the width of a kitchen, our copper splashbacks can be produced up to 3000 mm in a single seamless run, subject to layout and site access.

This allows copper splashbacks to be specified for large-format installations, including AGA and range cooker splashbacks, where accuracy and continuous panels are essential.

We work from customer measurements, templates, sketches, or technical drawings to ensure accurate fit and alignment. Fabrication is carried out in our UK workshop using laser cutting and computer-controlled press braking, allowing us to achieve clean edges, accurate cut-outs for sockets and switches, and consistent folded returns where required.

For installations requiring additional rigidity, copper splashbacks can be formed into tray sections and bonded to 9 mm moisture-resistant MDF or birch plywood, improving stability and simplifying installation. This approach is commonly specified for larger splashbacks or where wall conditions require additional support.

Where splashbacks are specified alongside other fabricated copper elements — such as copper worktops or as part of a full bespoke copper kitchen installation — we ensure consistent material thickness, detailing, and finish specification across all components.

In this image: A bespoke copper kitchen splashback fabricated to size and installed as a full-width panel behind a cooker run, demonstrating accurate fitting, clean edge detailing, and suitability for extended splashback layouts.

We manufacture copper splashbacks using high-quality copper sheet sourced from leading European mills, ensuring consistent material performance and finish quality. Our standard specification uses 1.2mm thick copper, providing improved rigidity and durability compared to thinner sheets, which can be more prone to distortion during handling and installation.

Our fabrication process allows us to produce copper kitchen splashbacks in lengths of up to 3 metres in a single panel, reducing the need for joints and creating a clean, seamless appearance. This is particularly beneficial for larger kitchen runs and full-width splashback installations.

As a natural material, copper may exhibit slight variations in colour and tone between batches. This is an inherent characteristic of the material and contributes to the unique appearance of each splashback.

This video shows two copper splashbacks being produced in our workshop. Each splashback is made from solid copper sheet bonded to 18mm MR MDF board for strength and easy installation. The copper is protected with a film during cutting on our 3m × 1.5m CNC router, ensuring a clean finish while allowing us to add precise details such as socket cut-outs. Once cut, the panels move through our patina department where the ageing process is applied, before heading to our spray shop for a durable lacquered finish that protects and enhances the copper surface.

Watch our CNC router in action cutting bespoke copper splashbacks – see the full video on YouTube.

Following fabrication, copper splashbacks can be supplied in a range of specified finishes, selected according to reflectivity, surface texture, and maintenance requirements. Finishes are chosen at the point of manufacture and supplied with appropriate surface protection for kitchen environments.

Natural and satin copper finishes retain the base surface of the copper sheet and offer a mid- to low-sheen appearance. These finishes may be supplied untreated or clear lacquered, depending on how much surface change is acceptable over time. Lacquering reduces marking and simplifies routine cleaning where a more stable appearance is required.

Aged and antique copper finishes are produced through controlled surface treatment and are supplied fully sealed as standard to stabilise the appearance and protect the surface during everyday use. These finishes are commonly specified where reduced reflectivity or tonal variation is preferred.

Blue and green patina finishes are created through accelerated oxidation processes and must be lacquered to preserve colour consistency and durability in kitchen environments. These finishes are typically specified for feature splashbacks where colour variation is part of the design brief.

Mirror-polished copper splashbacks provide a high-reflectivity option and are supplied ready for installation. As with all finishes, handling guidance and surface protection are provided to ensure the splashback performs as expected once installed.

Further technical information on copper surface treatments is available on our
patina sheet metal page, with additional finish reference examples shown on our copper finishes page.

Our friendly and knowledgeable team is always on hand to provide expert advice and guidance, whether you’re planning a bespoke copper sink, a matching splashback, a copper worktop, a coordinating bespoke copper cooker hood, or a full kitchen installation. We look forward to hearing from you and helping you bring your ideas to life!

For more inspiration, explore our recent blog on copper kitchen splashback ideas, featuring seven finishes and design styles.

If you have a specific project in mind and you would like to discuss your requirements, we would be delighted to assist. Simply email us at sales@metalsheets.co.uk, call us on 0151 526 4777, or fill in the contact form on this website.

Every copper splashback is manufactured to order and installed in a wide range of kitchen styles, from contemporary to traditional layouts.

Copper Splashbacks – Frequently Asked Questions

Are copper splashbacks suitable behind hobs and cookers?

Yes, copper splashbacks are suitable behind hobs and cookers. Solid copper can withstand normal heat levels from gas, induction and electric cooking. For open-flame ranges, we recommend allowing a small clearance. Copper is commonly used in both residential and commercial kitchens due to its durability and heat resistance.

How do you clean a copper kitchen splashback?

Cleaning a copper kitchen splashback is simple. Use a microfibre cloth with warm soapy water and dry with a soft cloth. For natural or aged copper finishes, avoid harsh chemicals as these can affect the patina. Polished copper can be maintained with a copper-safe cleaner if required.

What sizes can copper splashbacks be made in?

We manufacture bespoke copper splashbacks up to 3 metres in a single panel with no joints. Each splashback is made to measure and can include socket cut-outs, shaping, and bonded backing where required to suit your kitchen layout.

Do copper splashbacks change colour over time?

Yes, natural copper develops a patina over time, which gradually changes the colour and tone of the surface. This is a natural characteristic of copper. For a more consistent appearance, aged, antique or lacquered copper splashbacks can be specified to stabilise the finish.

What finishes are available for copper splashbacks?

We supply copper splashbacks in a range of finishes including natural, aged, antique, satin and blue or green patina. Each finish is selected at the point of manufacture depending on the desired appearance, reflectivity and maintenance requirements.